Dear guys,you may have to make some minor adjustments of your own.

How to make your own standard Rubber Band Gun

Make your very own rubber band gun

what you'll need:
5 unchopped chopsticks
(about 3m. of string or 7 rubber bands)
2 rubber bands
duct tape

1. Get one of the unchopped chopsticks. chop it.
2. Now take one of the two pieces. chop it in half.
3. Take one of the chopped pieces, and estimate where it's about one forth.
4. Take one of the rubber bands. Put it around the one forth point. Use the duct tape to keep it on there.
5. Take one of the unchopped chopsticks and estimate where is about one third.
6. Get two other unchopped chopsticks. Sandwich it like shown in the picture below. (the lines represent the chopsticks.)
7. Next, get another unchopped chopstick and chop it. lay it on a surface so it looks like x:






8. Now connect the "Sandwich" with the "X":






9. Get the little piece from step 2 with the rubber band. put it in between the sandwich and the X. Make sure to put it in the middle of the sandwich.(the second picture doesn't include the x.)also amke sure the end with the rubber band is facing down.





10. Get the other little piece from step 2. put it on top of the sandwich, one fourth of the length from the left edge in the picture. (the second picture does not include the x.) IMPORTANT: make sure you put it on vertically when you look at it from the top. when you look at it from the top, the X would be a straight line and the sandwich horizontal.






11. Get one of the rubber bands. Put it around the little piece, like this: and then hook it around the little piece 2 like this: Ok, it's a little complicated. You do it like this. first you hook the rubber band on top of the little piece, on the side not facing the x. then you put the A and B under the little piece 2 as shown:(the orange is the rubber band)
12. Congratulations! you just made your own skeleton of the RBG! all you need to do now is to fasten the x to the sandwich and wrap the sandwich with duct tape. also fasten the little piece 2 to the sandwich. DO NOT FASTEN THE LITTLE PIECE TO THE SANDWICH OR THE X. IT IS THE TRIGGER.

Shooting

How to load your RBG

put the rubber band on the tip of the sandwich. Pull it all the way to the little piece. Hook it on to the little piece. Hold the X. Pull the little piece a.k.a. trigger. The rubber band would shoot. Good luck.

About this Blog

This Blog, the home of R.B.W.,is a public blog. Anyone can view this, and anyone can comment. I bet you'll want to bookmark this blog, because there's going to be weekly updates* on this blog, with new games, items and toys for enjoying. This blog is created by The Spriters Guild, the best spriters on the web. Hope you have fun browsing through this blog!

*UPDATE: There will be updates whenever I want to. No guarantees, since I am busy.